Coping Saw: Uses, Safety and Best Options
You may have seen the carpenter use a coping saw to clean out dovetails or make borders that match. You may have also seen people making signs use this hand tool to make letters with closed ends.
Now, look around your home to see what else might have been done with a coping saw. Mould and furniture are the next most likely culprits, and rightfully so. This clever tool is needed to make a lot of things.
During a long vacation, I learned how important this small hand tool was. For my lampshade project, I needed to cut a pattern into a sheet of acrylic. I could give the work to a CNC service provider or do it myself with a cutting saw.
I chose to save the first choice for another time and get my hands dirty by using a coping saw. I have to tell you that this small hand tool is unique in how much it can do with its simple body.
But there are some things to think about when dealing with it. To use it safely, you should clamp your item down with a clamp. Carefully choose the blade. They are usually 6.75 inches long and have 10 to 20 teeth per inch. A fret saw could be helpful if you want to work on jewellery or small bits of metal.
Keep reading : Power Tools Dubai
What is a coping saw?
A coping saw is a hand tool that is used to cut complex designs into surfaces made of wood, plastic, MDF, or metal. It is like a scroll saw or puzzle. It is a small tool that you use by hand.
You can cut complex designs, shapes, and curves with a coping saw. When we have a coping joint to work on, we often use the coping saw. It’s a type of joint where one piece of the moulding corner is cut to fit the shape of the other piece.
The blade of a coping saw is very useful because it can be used in many different ways. For example, it can make cuts and patterns on the inside of a surface without having to cut from the outside.
This is possible because the blade can be taken out of its frame, put into a hole that has been made on the surface, and then put back into the frame to continue cutting from the hole. So, a pattern can be cut deep into the surface without going all the way through the edge.
You will be Interested on : Bosch Power Tools Dubai
Use cases
A coping saw is often used to cut the right shapes for fitting two different surfaces together. This small hand tool can make the fine, tight cuts that are needed to make inside parts that look great and are done by a professional.
How can you use a coping saw safely?
A coping saw is a useful hand tool that lets you make intricate cuts and shapes on a surface. Since a coping saw has a thin blade made of sharp steel that can cut your hands or other parts of your body, you should be careful when using it.
Read on : Makita Power Tools Dubai
Wear PPE
When you use a coping saw, you get very close to the thing you are cutting. Since a coping saw works by cutting into a surface, it can throw up bits that can get into your eyes. So, you need to wear safety glasses to keep dust and shards from getting into your eyes.
Use a protective case for your tool
The coping saw has a sharp blade that fits tightly into its frame. The whole tool works as one piece. You could hurt yourself if it falls on you or if you hit it by chance. When you are not using it, it is best to keep it in its safe sheath or holster. This will make sure that you and your coping saw are both safe.
You will be Interested on : Dewalt Power Tools Dubai
Maintain a safe distance
The blade of the coping saw has teeth that are very sharp. When you’re cutting something, keep your hands and fingers out of the way. You should also move things that aren’t needed away from where you work. This must be done to make sure that the coping saw doesn’t cut anything else.
Keep your machine in good condition
The prices of a coping saw’s blades are low. If the blades you’re using are worn down, bent, or missing teeth, you should get new ones. Make sure that the blade is not loose on its body when you use it.
Keep reading : Stanley Power Tools Dubai
Oil the saw
The teeth of the blade should be oiled after each use. To do this, put on a pair of work gloves and put the oil on the teeth of the saw. Follow the directions on how to use the oils.
How do I choose a good-quality coping saw?
For the kinds of jobs that coping saws are used for, they need to be light. Since they are already simple and skinny, not much more is likely to be added to them. The only thing we can count on is that the frame, handle, spigot, and blade will be made of high-quality materials.
There are many different kinds of saws, and the quality of the material is what sets them apart. Some blades are strong and don’t lose their sharpness quickly. The number of teeth per inch defines the blade, and most common blades have between 14 and 16 teeth per inch. The Olson SF63510, the Bahco 301, the Irwin ProTouch, and the Stanley Fatmax are some of the best names and models of coping saws.
Last things to say
The coping saw is a very useful hand tool that is used in a wide range of hobbies and jobs. It can make an inside cut and can make patterns that are intricate and small.
But to get the most out of this simple-looking hand tool, you need to know a bit more about it. Also, you need to follow safety rules.
You can also buy
